LED Strip 608LED COB • 24V • 14W • 2700-6500K • IP66 • 1350lm • Ra90 • 10.3mm

COB LED flexible strip CCT (dual color) 608 LED/m 14W 24V IP20 is one of the newest models of LED strips available on the lighting market, with the ability to change the bar temperature from 2700K to 6500K. It is primarily designed for applications where a uniform line of light is required - even when used in a very shallow LED aluminum profile. The presented COB LED strip model is also characterized by a wider light spread angle (180°) than LED strips based on SMD diodes. It also has a high luminous efficiency of 90 lm/W and a very high color rendering index CRI of RA>90.
We ensure that the LED strips in our offer are built with carefully selected diodes. The LEDs mounted on LED strips are primarily selected based on identical parameters such as color temperature, chromaticity, and voltage. Our LED strips have a very good color deviation ratio (3 SDCM). Proper selection of LEDs guarantees that the resulting LED strip does not have discolorations caused by inadequate LED selection and creates a uniform light of the same shade along the entire length. The process of selecting diodes with identical parameters is called "BINning."

We also ensure that when you place an order, you receive LED strips only from the same BIN. With the continuous development of LED technology and for technological reasons, the BIN changes from time to time, so if your lighting setup requires identical and uniform light, you should make sure that the LED strips come from the same batch. Each LED strip should also be marked with codes on the packaging, through which we can identify whether a particular production lot is based on the same LED bin.

Due to the selection of appropriate components and their high quality, attention to detail, and precision during construction, a 3-year warranty is provided for the LED strips.

For proper operation, as well as for the adequate lifespan of the LED strip, its construction is also crucial. In addition to the important selection of LEDs and resistors, the FPC substrate is also an important element. The LED strips in our offer use only a double layer of copper in the FPC substrate of suitable thickness, which reduces voltage drops over longer sections of LED strips and allows for more efficient heat dissipation.On the copper layers, both top and bottom, a protective white layer is used. After that, the appropriate markings are placed on this layer, and LEDs with resistors are mounted. Each of the LED strips is equipped on the bottom layer with 3M double-sided adhesive tape from the renowned company. The double-sided tape allows for simple and durable mounting on the surface. Depending on the LED strip model, appropriate coverings are placed on the top side to achieve proper insulation.