ES32 LED Stair Controller with Two Motion Sensors, 32 Channels

The ES32 LED stair controller is an advanced control device dedicated to LED stair lighting systems or various types of communication pathways. The ES32 stair controller has 32 outputs dedicated to constant voltage light sources (for example, LED strips or LED stairs). This allows the creation of 32 independent steps that can be individually configured using a dynamic OLED display located on the device's casing. A cross-sectional element of traditional stair controllers is an additional input that allows the use of digital LED lighting.
 
The ES32 LED stair controller is characterized by a high degree of expandability, as it has four operating modes and multiple programs that allow you to determine the sequence in which the connected LED lighting should be turned on/off. The triggering of the activation sequence itself can be carried out through dedicated inputs for PIR motion sensors or externally using a potential-free input or a twilight sensor. The LED stair controller has a universal power supply from 5 to 24V, and the constant voltage outputs can be loaded with a maximum of 1A, while the digital output itself supports up to 960 pixels.

• ES32 Stair Controller - 1 pc
  Digital PIR Stair Motion Detector - 2 pcs
  Twilight sensor in the form of a small probe - 1 pc
  Additional cables for connecting motion detectors - 5m / x2 pcs

• Dedicated to LED installations for stairs or passages A wide range of supply voltages and 5-24V DC outputs Maximum number of outputs for constant voltage LED lighting from 8 to 32 PIR sensor detection range of 3 m (not adjustable) PIR sensor detection angle of 120 degrees Additional SPI input allowing the use of a digital light source Allowed power for a constant voltage output - 1A (max 24W / 24V) Maximum number of pixels for SPI digital output from 32 to 960 Additional potential-free input for external control
• Dynamic OLED display showing current parameters
  Four operating modes that must be set according to the type of LED lighting used
  Three modes for executing the light switching sequence for constant voltage outputs
  Twelve execution modes for the sequence of digital LED lighting
  Support for the most popular integrated circuits used in digital lighting
  The scale controller test mode allows you to check the operation of the installation
  Simple controller configuration using an OLED display
  Short-circuit protection for all 32 outputs
  Small sensor size (total diameter 27 mm, key channel diameter 19 mm, length 30 mm)
  Screw terminals with quick-release capability during installation
  Openings on the casing allow for stable surface mounting
  High-quality workmanship preceded by a 5-year warranty period